Mitsubishi Electronics PK20 user manual For battery removal, EN-13

Models: PK20

1 52
Download 52 pages 62.1 Kb
Page 13
Image 13
For battery removal

Condition Indicator Stand-by.

When the lamp is on.

LAMP (Green)

POWER (Red)

Off

On

On

Off

When you use the battery, please observe the following safety precautions:

Warning:

When the projector is off, the charger works as a fast charging mode. It takes approximately 4 hours to complete charging.

When the projector is on, the charger works as a slow charging mode. It takes approximately 8 hours to complete charging.

The average charge time: 500 times (Less than 50% of charge).

For battery removal

Slide the battery lock switches on the two sides to remove the battery from the projector.

Dispose of used batteries according to your local regulations.

Please do not put battery into fire or heat, otherwise it may cause heating, fire, rupture or explosion. Please do not put battery away or transport it with kind of electrically conductive like necklace, hairpin, etc., otherwise it may cause heating, fire, leakage or explosion.

Neither the positive nor negative terminal of batteries can touch any metal, otherwise it may cause heating, fire, rupture or explosion.

Please do not poke battery with needle, hit, decompose or try to transform it, otherwise it may cause heating, fire, rupture or explosion.

Please do not use or put battery near fire or under high-temp environment, otherwise it may cause heating, fire, rupture or explosion.

EN-13

Page 13
Image 13
Mitsubishi Electronics PK20 user manual For battery removal, EN-13