3-1. Displaying JPEG images
Display thumbnails in the thumbnails screen.
Move the red frame using the // buttons to select the file you want to play (show) and press the ENTER button. The image changes and a slide appears.
To open a folder, move the red frame to the target folder and press the ENTER button. You can move to a folder located 3 levels lower in the same method.
* You cannot open a folder at the lowest level (3rd level).
To return to folder at a higher level, move the red frame to a folder indicated with a [RETURN] mark and press the ENTER button.
Use the / buttons to change the displayed slide. ( displays the previous slide and displays the next slide. These buttons cannot be used during a slide show.)
Pressing the button rotates the displayed slide in increment of 90 degrees to the right. The rotation data is not applied to a different slide or images in a different folder.
Press the ENTER button to return to the thumbnail display.
3-2. Starting a slide show
If [AUTO START] in the [SLIDE SHOW] menu is set to [ON], a slide show will start by inserting an SD card and changing the input mode to “SD Viewer”, or if the input mode is preset to “SD Viewer”, a slide show will start immediately when an SD card is inserted.
A slide show can be started when [AUTO START] is set to [OFF] by displaying a JPEG image and pressing the
button. A slide show will start from the file currently displayed. Press the ENTER button to return to the thumbnail display.
Press the Still button on the remote control to pause a slide show. The paused status can be cleared by pressing any button other than the ENTER button.
Other than the above, the [SLIDE SHOW] menu offers [REPEAT SETTING], [INTERVAL TIME], and [TRANSITION EFFECT] settings.
The file subjected to the slide show is the JPEG file in the current folder.
