Problem | Cause and solution | |
Rainbow blurprojected images. | This is due to color breaking noise that occurs in a DLP system and is not a malfunction. | |
|
| |
Fine streak pattern appears in projected images. | It occurs because of interference with the screen and isn’t a product malfunction. | |
Change the screen or readjust the focus of the projector. | ||
| ||
|
| |
| Connect the cable’s plug with the external device’s connector firmly. | |
| Keep the projector away from equipment generating interfering radio waves. | |
Projected images appear wavy and distorted. | When the keystone adjustment is carried out, the image may not be displayed | |
correctly because of the type of input signal. This isn’t a product malfunction. | ||
| ||
| In this case, readjust the keystone so that the amount of keystone correction | |
| is as small as possible. | |
|
| |
Tint in projected images is incorrect. | Check that the cable connected to the external device isn’t broken. | |
|
| |
Only the motion areas in the images | This is caused by the computer being used. Contact the manufacturer of your | |
supplied from the computer aren’t displayed. | computer. | |
|
| |
| Match the output resolution of your computer with the resolution of the projector. For the | |
| method to change the output resolution of the computer, contact the manufacturer | |
Projected images are obscured. | of your computer. | |
| Some images and texts appear obscured during the keystone adjustment. | |
| In such cases, use the projector without applying the keystone adjustment. | |
|
| |
Color on the projected images is not good. | Select the appropriate brightness mode. | |
|
| |
The white color looks greenish when the | Change the brightness mode setting to Standard or Low. | |
brightness mode is set to high. |
| |
|
|
