Mitsubishi Electronics PK20 Power supply, Using the AC adapter, Using the optional battery, EN-11

Power supply

Using the provided AC adapter or an optional Lithium-ion rechargeable battery .

Warning:

The projector must be used with the provided AC adapter. Damage caused by the use of an incorrect adapter is not covered under the warranty.

Using the AC adapter

1

3

2

1.InserttheplugfromtheACadapterintotheDCINterminal.

2.Insert the appropriate end of the power cord into the AC adapter.

3.Insert the plug on the power cord into a wall outlet.

The POWER indicator lights red when using the AC adapter.

Use appropriate power cord for your country.

Using the optional battery

The projector must be used with specified Lithium-ion rechargeable battery (BT-PK20R). Charge the battery before using the projector for the first time use. You may also use the projector when charging the battery.

About the battery wear

Display time with battery (BRIGHTNESS MODE is set to HIGH): 1.5 hours.

Display time with battery (BRIGHTNESS MODE is set to STANDARD): 2.0 hours.

Display time with battery (BRIGHTNESS MODE is set to LOW): 2.5 hours.

Important:

Display time varies according to the ambient temperature and the status of battery.

After charging 500 times, it can shorten the half of battery life and reduce its performance.

EN-11