Mitsubishi Electronics ws-48413, WT-42413 Connecting a DTV Receiver, DTV Connectors and Adaptors

Connecting a DTV Receiver

Note: The TV back panel and connections shown here are for reference only and may vary by model.

DTV Connectors and Adaptors

(Figure 11)

The TV back panel has five RCA-type connectors for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver. These adaptors should be available at most electronic supply stores.

			or
BNC to		Adaptor	RCA
RCA	BNC	Fitted to	Connector
Adaptor	Connector	Connection

Figure 11. DTV connectors and adaptors.

DTV Receiver with Component Video Connections (Recommended)

(Figure 12)

See Appendix B, page 67 for component video signal compatibility information.

For digital audio connections, see your DTV receiver and A/V receiver Owner’s Guides.

1.	Connect the outside antenna cable, or satellite to
	ANT or SATELLITE IN on the DTV receiver
	(see your DTV receiver owner’s guide for
	instructions and cable compatibility).
2.	If your DTV receiver has a built-in terrestrial tuner,
	connect the incoming terrestrial antenna to ANT
	on the DTV receiver. If your DTV receiver does
	not have a built-in terrestrial tuner, this TV will
	only be able to provide an analog signal through
	Ant-A on the TV back panel.

�� ���� ����� �������� �������

���������

��� � � ����� �����

�������		� � � � �			�	�
���	�	�	�			�
			�				�
				�			�
			��			�
			�������	�			��
			�				�
				��
			� �	�		�	� �
			� ��� ��	� �			�
			������	����� �
			���� �	� � �� �
			������

���������� ����� �

���� � ���� ����� �

�

�

�

�����

3. Connect the RCA-type cables from the DTV

receiver outputs to DTV INPUT Y/Pb/Pr on the

	������	����� �
	�����	�����
�� � � �	��� �	�� �� �
	���

� ���

IR EMITTER

REPEATER NetCommand IR

TV back panel. You may need to set the DTV

Input Assignment to Y/Pb/Pr.

(see page 35 for WT-42413 or

page 38 for WS-48413, WS-55413 or WS-65413)

4. Connect the L (left) and R (right) audio cables

from the DTV receiver to DTV AUDIO on the

TV back panel.

5. To utilize the benefits of a digital A/V receiver,

connect your DTV receiver’s digital audio out

to a digital input on your digital A/V receiver.

Component (1 and 2) may also be used for 1080i

��� �������� ����� ��������� ����� ������������

����� ����� �����

�				�
	�	�	�	��������

	�	��	�	�	�
	��				���
	�	��
����� ����			� ����	� ����
	������				�������

������� ����� ���

������� ���� �� ���������� ����� �� ��� ����

��� �� ��

�� � �� �

�� ���� ������������ ��

�

��

�

��������

��������

����� �� ���������

�

��

�

components.

Figure 12. Connecting the DTV receiver with component Video Connections.

19