Mitsubishi Electronics ws-48413 Component Inputs, DTV Input, Input Levels with Component Video

Appendix B: High Definition Input Connection Compatibility

Component Inputs

These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i.

All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver specifications before connecting.

DTV Input

These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i.

All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver specifications before connecting.

This input is also compatible with some DTV receivers using RGB or RGB with “separate H and V sync.” Industry standards for DTV RGB signals systems, synchronization, timing, and signal strengths are

not currently established. These inputs will not be compatible with all DTV receivers that offer RGB. If your DTV receiver offers both DTV component video signals and DTV RGB signals, Mitsubishi suggests you use the DTV component video signals. Please check the DTV receiver specifications before connecting.

Input Levels with Component Video

Y = 1.0Vp-p (includes sync) 75ohms

Pb	= 700mVp-p, 75ohms (can also receive
	signals from outputs labeled B-Y and Cb)
Pr	= 700mVp-p, 75ohms (can also receive
	signals from outputs labeled R-Y and Cr)

Input Levels When Used With

Component Video Signals

EIA - . Standard Levels

Y	= 1.0Vp-p (includes sync) 75ohms
Pb	= 700mVp-p, 75ohms
Pr	= 700mVp-p, 75ohms
H	= Not Used
V	= Not Used

Input Levels when Used With RGB Video Signals

G (Y) = 1.0Vp-p 75ohms (compatible with sync on green)

B (Pb) = 700mVp-p, 75ohms

R (Pr) = 700mVp-p, 75ohms

H = 4Vp-p+/-1.0v, 2.2k ohms

(when using separate H and V sync) V = 4Vp-p+/-1.0v, 2.2k ohms

Input when Used With DVI

HDCP compliant

E-EDID (Enhanced-Extended Display Identification) 1.3 compliant

DVI-D uncompressed, high-speed, digital single-link connection

Suggested scan rates: 1080i, 480p, 480i

67