Mitsubishi Electronics X100 manual Super

SUPER

IMPOSE (Picture in Picture)

SUPER

IMPOSE

RETURN

SOURCE	FRAME	FRAME
	POS	SIZE
VIDEO1	1	1
VIDEO2	2	2
RGB1	3	3
RGB2	4
PC1	5
PC2

RESET

SOURCE Selects the desired input source of the sub-image. Select the desired input source by pressing the ª or º buttons on the control panel (or { or } buttons on the remote control).

FRAME Selects the desired position of the sub-image. Select the desired position by pressing

POS the ª or º buttons on the control panel (or { or } buttons on the remote con- trol).

FRAME Selects the desired size of the sub-image. Select the desired size: small, middle or

SIZE large by pressing the ª or º buttons on the control panel (or { or } buttons on the remote control). Selecting No. 5 of FRAME POS doesn’t change the frame size.

SOURCE ID Use to set SOURCE ID on or off. If you select OFF, the mode display automatically disappears after about four seconds. If you select ON, the mode display continues to appear. The SOURCE ID is automatically set to OFF, when the power is turned off.

BLUE BACK (VIDEO MUTE)

TEST PATTERN

Use to set BLUE BACK on or off. When there is no input signal, the projector displays a blue screen. Select OFF if you don’t want to display a blue background.

Use to display the built-in test pattern on the screen. There are five different patterns. Select the desired pattern by pressing the ª or º buttons on the control panel (or { or } buttons on the remote control).

Important:

To make the test pattern disappeared, press the buttons except FOCUS/ZOOM, + or - buttons while the MENU display in not on screen.

29