Indicators / TEMP, LAMP, POWER
The projector has three indicators each of which shows the working condition of the projector.
•Though the LAMP and TEMP indicators are on the main menu control window of PCGC, the each indicator may not match the one of those on the control panel.
LAMP TEMP
FREEZE
SOURCE /CAPTURE
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer.
INDICATOR | SHOWS | CONDITION | POSSIBLE SOLUTIONS | |||
|
|
| • Unusual temperature |
|
| |
|
|
| The power is turned off |
|
| |
|
|
| and the POWER indicator |
|
| |
|
|
| lights up red. |
|
| |
|
|
| • The ventilation slots or air | • Remove the object from | ||
|
|
| filter is clogged with dust | the ventilation slot. | ||
TEMP |
| or debris. |
|
| ||
blinking red | • The fan has stopped due | • Pull out the power | ||||
INDICATOR | ||||||
| to an impediment. | plug and remove the | ||||
|
|
|
| object. If you cannot, | ||
|
|
| • The location temperature | consult your dealer. | ||
|
|
| • Relocate the projector | |||
|
|
| is too high. | to a cooler place. | ||
|
|
| • The filter is dirty. | • Clean the filter. | ||
|
|
|
|
|
| |
|
| Steady green | Normal | - |
| |
|
|
|
| |||
LAMP | Blinking red | Lamp is almost used up. | Replace the lamp. | |||
INDICATOR |
|
| ||||
Steady red | • Lamp is used up. | Exchange with a new | ||||
|
| |||||
|
| lamp if the same | ||||
|
| • The power is not turned on. | ||||
|
|
| problem recurs. | |||
|
|
| (Power indicator lights up red.) | |||
|
|
|
|
| ||
|
|
|
|
| ||
POWER | Steady red | Standby | - |
| ||
INDICATOR |
|
|
|
|
| |
| Steady green | - |
| |||
|
|
| ||||
50
