Replacement of a light source lamp
The light source lamp is designed to project the image on the LCD panel. When the light source lamp no longer functions, replace it with a new one to ensure optimum performance.
Caution:
•Do not remove the light source lamp from inside of this equipment immediately after using the projector, you may get burned because of the high temperature of the light source lamp.
•When you replace the light source lamp, press the power button to power off, then wait for 120 seconds in
•Do not remove the light source lamp except for replacement. Careless treatment can cause injury or fire.
•Do not touch the lamp directly. It may be broken and may cause you to injure or burn yourself.
•Be sure not to drop the lamp lid screw into the projector. Also be sure also not to insert metal or any flammable objects, it may cause fire or an electric shock. If any objects are inserted, please unplug and contact your dealer.
•Install the lamp securely, failure to do so it may cause a fire.
1.Loosen the screw of the lamp lid on the top cover using a screw
Important:
Be careful not to damage the electric wire connected to this equipment.
2.Use a screwdriver (+) to loosen the two lamp screws. Use a soft cloth to cover the lamp.
3.Hold onto the projector by the handle as your pull out the lamp.
Caution:
For the lamp you have removed, do not spill liquid on it,
place it near flammable objects or where children can touch
it. Otherwise, it will cause injury or fire.
Loosen here
Screws of the lamp
Handle
48
