SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–10
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Data Rate TDR= 10 bytes Command or Query.
Tx Data rate, in kbps.
Resolution=1 bps.
Example: TDR=002047.999 (which is 2047.999 kbps)
TDR=
TDR?
TDR*
TDR#
TDR? TDR=xxxxxx.xxx
(see description of
arguments)
Tx
Reed-Solomon
Encoding
TRS= 1 byte, value
of 0 or 1 Command or Query.
Tx RS encoding
0=Off
1=On
Depending on Modem mode, not all of these selections will be
valid.
Example: TRS=0 (RS encoding is Off)
TRS=
TRS?
TRS*
TRS#
TRS? TRS=x
(see description of
arguments)
Tx
Reed-Solomon
Code Word
TCW= 1 byte, value
of 0 to 5 Command or Query.
Tx RS encoding
0 = RS(225,205,10)
1 = RS(219,201,9)
2 = RS(208,192,8)
3 = RS(194,178,8)
4 = RS(126,112,7)
5 = RS(220,200,10)
Depending on Modem mode, overhead type, and data rate, not all
of these selections will be valid.
Example: TCW=0 (This is a ‘don’t care’ if RS is Off under TRS)
TCW=
TCW?
TCW*
TCW#
TCW? TCW=x
(see description of
arguments)