Monarch 9400 Series manual Series Programmers Manual

9400 Series Programmer's Manual

4.Select the parity you need and press E. You'll see

Enter Word Length [7-8]: 8

5.Select the word length you need and press E . You'll see

Enter Stop Bits [1-2]: 1

6.Select the stop bits you need and press E . You'll see

Enter Start (XON) character: 17

7.Enter a number from 1-127 for XON flow control, or 128 for DTR flow control. You'll see

Enter Stop (XOFF) character: 19

8.Enter a number from 1-127 for XOFF flow control, or 128 for DTR flow control.

NOTES:

∙If you select DTR control (128) as the XON character, the printer will automatically set 128 (DTR control) for the XOFF character.

∙The Start and Stop characters must be set at 128 (DTR flow control) for IBM PC equipment.

You'll see the Configuration Options menu.

Press ! to exit to the main menu.

3-4