Bar Code Field Record
The bar code field record is co nstructed as shown below.
Syntax
B##,IFLAG,IVALUE,ROW,COL,DENSITY,BFONT,F-ROT,HEIGHT,HR
Field Contents
BARCODE Must be the letter ‘B’ for a bar code field.
The B is followed by one or two digits for
the field number. There can be up t o 100
fields per format, in any c ombination of
text, barcode, line, or graphic f ields.
Values: 0-99
IFLAG You can set numeric fields to incr ease or
decrease in value as each tic ket is printed.
This parameter consists of on e character
to define the field as inc r e m en ted,
decremented, or constant.
Values: I = Increment
D = Decrement
If the field does not change, de fine IFLAG
as ‘I’ and set IVALUE to zero (0).
NOTE: Do not select incrementing on
UPC or EAN bar codes or fields
that contain a check digit.
IVALUE One to three digits to defin e the amount by
which the value in the field increases or
decreases as each ticket is printed. If the
field does not change, define I FLAG as ‘I’
and set IVALUE to zero (0).
Values: 0-999
9400 Series Programmer’s Manual
4-14