9400 Series Programmer's Manual
The table below shows the characters per inch for Code 128. The table shows the values for numeric data, and for alphanumeric data at each of the three densities available on the printer. The characters per inch for your bar code will be somewhere between these two values, depending on the mixture of numeric and alphabetic characters. For a precise calculation of the width of your bar code, refer to the specification for the Code 128 bar code.
|
|
|
|
|
| Density | Numeric | Alpha- |
|
|
| Data | numeric data |
|
|
|
|
|
|
| 1 | 17.48 | 8.74 |
|
|
|
|
|
|
| 2 | 11.66 | 5.83 |
|
|
|
|
|
|
| 3 | 8.74 | 4.37 |
|
|
|
|
|
|
|
|
|
|
|
NOTE: Bar codes printed in parallel mode (top of the bar code toward top of tag) on the 9465 only have the characters per inch shown in the following table.
|
|
|
|
|
| Density | Numeric | Alpha- |
|
|
| Data | numeric data |
|
|
|
|
|
|
| 1 | 23.92 | 11.96 |
|
|
|
|
|
|
| 2 | 15.95 | 7.97 |
|
|
|
|
|
|
| 3 | 11.96 | 5.98 |
|
|
|
|
|
|
|
|
|
|
|
