9400 Series Programmer's Manual
COLUMN
DIRECTION
STOP
One to four digits to define the column location of the field on the supply. This is the distance from the guide edge zero point at the left edge of the supply and the left edge of the field.
The zero point is 1.5 mm or 0.060 inches from the left edge of the supply.
The unit of measurement is tenths of millimeters. The range must be less than the maximum width of the supply.
Values:
9425
9445
9465
9474
One digit to define the direction of the line.
Values: | 0 | = Vertical |
| 1 | = Horizontal |
One to four digits to define the stop position (Row or Column, dependent on the DIRECTION setting) for the line.
Values:
