C l e a n i n g t h e P r i n t h e a d
Remember to clean the printhead every time you load a new label roll into the printer.
Caution: You must turn off the printer’s power before cleaning the printhead. To clean the printhead while printing, you may lose your data when you turn off the printer.
1. Turn off the printer. Press the power switch on the back of the printer to the OFF (O) position.
2. Press the cover release levers towards the front
of the printer to release the cover. 3. Lift open the cover.
4. Moisten a cotton swab with isopropyl alcohol.
5. Rub the cotton swab across the printhead to remove any
6. Allow the printhead to dry for one minute before you close the cover and resume printing.
C l e a n i n g t h e P l a t e n R o l l e r a n d P r i n t e r
Moisten a cotton swab with isopropyl alcohol and run the cotton swab across the platen roller. Turn the platen roller with your finger and make sure it is clean all the way around.
Platen Roller
Note: Do not remove the platen roller.
Slightly dampen a cloth with water and wipe the printer’s exterior surfaces clean. Use a dry,