Problem | Action | |
Printing stops and | Calibrate the supply. | |
indicator light turns | 1. Turn off the printer. | |
RED. | 2. Load labels. See “Loading | |
Or, the printer does not | ||
Labels” in Chapter 1 for | ||
advance from one label | more information. | |
to the next correctly. | 3. Press and hold the FEED | |
| ||
| button while turning on the | |
| printer. | |
| 4. Release the FEED button | |
| after the indicator light | |
| starts flashing ORANGE. | |
| The printer calibrates the | |
| die cut sensor, measures | |
| the label length, and prints | |
| the test labels. | |
| 5. To resume normal printing, | |
| turn off the printer, wait | |
| two seconds, then turn it | |
| back on. | |
| Load different labels. See | |
| “Loading Labels” in Chapter 1 | |
| for more information. | |
| Clear a label jam. See | |
| "Clearing Label Jams" in | |
| Chapter 3 for more | |
| information. | |
| Make sure the die cut sensor is | |
| in the correct position (was not | |
| accidentally moved while | |
| loading supplies). | |
| See “Checking the Die Cut | |
| Sensor,” in Chapter 1 for more | |
| information. |