C o n n e c t i n g t h e P r i n t e r ’ s P o w e r S u p p l y

Do not touch the electrical connectors while setting up the printer. Electrostatic discharge can damage or destroy the printhead or electronic components.

To connect the power supply to the printer:

1. Place the printer on a table in a location that allows easy access to the front of the printer.

Note: Never operate the printer resting on its side or upside down.

2. Turn off the printer. Press the power switch on the back of the printer to the off (O) position.

3. Place the power supply in a suitable location, preferably on a table, near an electrical outlet.

4. Plug the three-hole end of the AC adapter cable into the three-pronged outlet in the printer’s power supply.

Caution: The printer’s power supply uses a different voltage than the keypad.

To connect the wrong power supply could permanently damage the keypad or the printer.

Getting Started 1-3