9494 Operator's Handbook
7.Close the printer.
Upper
Opening
Label
Guide
Lower
Opening
Make sure the ribbon is wound tightly inside the ribbon cassette before you close the printer. See "Reloading a Ribbon Cassette" to wind the ribbon.
8.Turn the printer on.
9.Wait until the LED flashes one time (about five seconds) and then press the trigger. The printer calibrates the label strip for printing.
Trigger | LED |
The LED slowly alternates flashing amber and green to indicate the printer is out of labels. When this happens, load a new roll of labels and press the trigger to clear the error.
