9494 Operator's Handbook

7.Close the printer.

Make sure the ribbon is wound tightly inside the ribbon cassette before you close the printer. See "Reloading a Ribbon Cassette" to wind the ribbon.

Upper

Opening

Label

Guide

Lower

Opening

8.Turn the printer on.

9.Wait until the LED flashes one time (about five seconds) and then press the trigger. The printer calibrates the label strip for printing. When you print, labels peel automatically through the upper opening in the label guide and the backing paper exits out the lower opening.

Trigger

LED

The LED slowly alternates flashing amber and green to indicate the printer is out of labels. When this happens, load a new roll of labels and press the trigger to clear the error.

2-10

Page 22
Image 22
Monarch 9494 manual Led