9494 Operator's Handbook
4.Remove the printed label or press the trigger to print the next label in the batch.
Trigger | LED |
Canceling a Print Job
To cancel the current print job, hold down the trigger until the LED stops blinking and displays solid green. The batch is canceled and the data is lost. To resume printing, you must download the batch again.
Printing in Continuous Mode ––––––––––––––––––––––––––––––––
In this mode, a format and data packet with a specific quantity of labels are sent to the printer. The labels print in one continuous strip.
To print in Continuous Mode:
1.Load the supplies for
2.Make sure a format and data packet are downloaded. For more information, contact your company's host support person or see the MPCLII Packet Reference Manual.
3.After the data packet is downloaded, the LED is solid amber to indicate the printer is ready to print and labels will print automatically.
4.After all the labels in the batch print, remove the label strip from the printer.
DO NOT jerk or pull labels strongly against the printhead. This may cause a label jam.
