Chapter 2. Loading Ribbon and Supplies
4.To close the printer, push the printhead assembly toward the front of printer, close the label guide and latch the face plate into place.
Loading Ribbon–––––––––––––––––––––––––––––––––––––––––––––
Use ribbon only when printing on thermal transfer labels.
To load the ribbon cassette into the printer:
1.Open the printer and remove the ribbon cassette.
2.Slide a new ribbon cassette onto the printhead assembly until it slips into place.
Ribbon Cassette
Printhead Assembly
3.Close the printer.
Make sure the ribbon is wound tightly inside the cassette before you close the printer. See "Reloading a Ribbon Cassette" to wind the ribbon.
