OPERATING INSTRUCTIONS AND BLOWER OPERATION
MATCH LIGHTING INSTRUCTIONS
1.Remove any items necessary for easy access to the pilot (for example: logs, screens, etc.).
2.Follow appropriate lighting instructions found previously. Instead of pushing and releasing the piezo button, light a match and hold the flame to the end of the pilot and ignite the pilot.
3.After control knob has been released and pilot stays lit, reinstall any items that were removed for pilot access.
4.Call a qualified service technician for repair or replacement of the piezo ignitor.
BLOWER OPERATION
Blower 
Control
Figure 37 - Location of Blower Control
Locate the blower control by opening control access door. The variable controlled thermostat blower is located to the right of heater controls. .
In the OFF postion, the blower will not operate; however, the heater can be operated without the blower being ON. In the ON (AUTO) position, the blower will start when the thermostat senses a sufficient increase in firebox temperature.
Note: Your gas logs and blower will not turn on and off at the same time. The gas logs may burn several minutes before blower turns on.
30 | 23D8020 |
