IDV380/IDV490 Fireplace Insert

INSERT installation

WARNING

Only persons licensed to work with gas piping may make the necessary gas con- nections to this appliance.

CAUTION

A manual shut-off valve is factory installed upstream of the appliance. Union tee and plugged 1/8" NPT pressure tapping point should be installed upstream of the appli- ance. Figure 15

NOTE : The gas line connection may be made using 1/2" rigid tubing or an approved flex connector. Since some municipalities have additional local codes it is always best to consult your local authorities and the current edition of the National Fuel Gas Code ANSI.Z223.1, NFPA54. In Canada CSA-B149 (1 or 2) Installation Code.

A listed manual shutoff is factory installed upstream of appliance. Union tee and plugged 1/8" NPT pressure tapping point should be installed upstream of the appliance. Figure 15.

IMPORTANT: The main gas valve is for turning on or shutting off the gas to the insert.

Check your building codes for any special requirements for locating equipment shutoff valve to inserts.

Apply pipe joint sealant lightly to threads. This will prevent excess sealant from going into pipe. Excess sealant in pipe could result in clogged burner system valves.

CAUTION

Use pipe joint sealant that is resistant to liquid petroleum (LP) gas.

We recommend that you install a sediment trap/drip leg in supply line as shown in Figure 15. Locate sediment trap/drip

leg where it is within reach for cleaning. Install in piping system between fuel supply and burner system. Locate sediment trap/drip leg where trapped matter is not likely to freeze. A sediment trap traps moisture and contaminants. This keeps them from going into the burner system gas controls. If sediment trap/drip leg is not installed or is installed wrong, burner system may not run properly.

Approved Flexible Gas Line Supplied with Appliance

Natural Gas

From Gas Meter

(4.5" w.c. to 10.5" w.c. Pressure)

Propane/LP

From External Regulator

(11" w.c. to 13" w.c. Pressure)

Tee Joint

 

Pipe Nipple

Figure 15 -

Cap

 

Gas Connection

 

16

57D0016

Page 16
Image 16
Monessen Hearth IDV490NVC, IDV490PVC, IDV380NVC, IDV380PVC manual Insert installation, Propane/LP

IDV380NVC, IDV490NVC, IDV380PVC, IDV490PVC specifications

The Monessen Hearth IDV490NVC, IDV380PVC, IDV380NVC, and IDV490PVC represent a cutting-edge series of direct vent gas fireplaces that combine efficiency, style, and innovative technology. These models are designed to enhance home aesthetics while providing efficient heating solutions.

One of the standout features of the Monessen Hearth models is their impressive heating capabilities. The IDV490NVC and IDV490PVC are designed for larger spaces, providing up to 37,000 BTUs, while the IDV380NVC and IDV380PVC are suitable for medium-sized areas, delivering up to 30,000 BTUs. This makes each fireplace an ideal choice for various residential applications, accommodating different room sizes and heating needs.

The appliances employ advanced direct vent technology, allowing for safe operation by drawing air from outside for combustion and venting exhaust gases outside. This feature ensures that indoor air quality remains unaffected, making these models eco-friendly alternatives to traditional fireplaces. The efficient combustion process also means lower gas consumption, resulting in cost savings and a reduced environmental footprint.

Each model comes equipped with a variety of flame and control options. The realistic ceramic logs and glowing embers create an inviting ambiance, while the adjustable flame height allows users to customize their experience. Additionally, an easy-to-use remote control feature gives users the convenience of adjusting flames and temperature settings without leaving their seats.

The construction of these fireplaces is robust, featuring high-quality materials that ensure durability and longevity. The heat-resistant glass allows for an unobstructed view of the flames, adding a touch of elegance to any room.

Aesthetic choices further enhance personalization, as Monessen offers customizable options for surrounds and mantels that blend seamlessly with various interior styles.

In summary, the Monessen Hearth IDV490NVC, IDV380PVC, IDV380NVC, and IDV490PVC fireplaces exemplify modern heating technology combined with stylish design. Their powerful heat output, direct vent capabilities, user-friendly controls, and customizable aesthetics make them exceptional choices for homeowners looking to elevate their living spaces while ensuring comfort and efficiency. Whether for aesthetic appeal or functional heating, these models provide a perfect balance for any modern home.