IDV380/IDV490 Fireplace Insert | OPERATING INSTRUCTIONS |
Lighting burner
main burner switch
The “ON/OFF” switch for the main burner can be found on the right side of insert surround. This switch allows you to turn on and to turn off the main burner without using the gas valve knob. Make sure the button is in the “ON” position to light the main burner. Figure 33
Lighting the burner
Depress and turn the knob counterclockwise to the “ON” position. Figure 34. It will take less than four (4) seconds for the burner to ignite.
Pilot position
Depress and turn knob to pilot position to keep burner off while maintaining the pilot light. Figure 35
ON
OFF
Figure 33 -
On/Off Switch
N |
|
|
|
O |
|
| O |
|
|
| F |
|
|
| F |
|
|
| P |
PILOT | |||
| O | L |
|
|
|
|
Figure 34 - On Position
to turn off gas
| O |
T | N |
O |
|
L |
|
I |
|
P |
|
| F |
| F |
| O |
PILOT |
Figure 35 - Pilot Position
Depress and turn knob clockwise to “OFF” position. Figure 36
adjusting blower speed
The internal blower helps transfer heat from heater into room. It will not turn on until heater is up to temperature (approxi- mately 10 minutes after starting).
To turn blower off, turn knob all the way counterclockwise . One click clockwise turns blower to high speed.
Turning knob clockwise from high position decreases speed of blower. Figure 37
| PI |
| L |
| O |
| T |
F |
|
F |
|
O | O |
| N |
Figure 36 - | PILOT |
| |
Off Position |
|
Figure 37 -
Blower Knob
26 | 57D0016 |