Monessen Hearth IDV490PVC product features, product SPECIFICATIONS, High Elevations, 57D0016

Models: IDV380NVC IDV490NVC IDV380PVC IDV490PVC

1 40
Download 40 pages 56.07 Kb
Page 5
Image 5
product features

product features

IDV380/IDV490 Fireplace Insert

product SPECIFICATIONS

This appliance has been certified for use with either natural or propane gas. Refer to the appropriate data plates.

This appliance is not for use with solid fuels.

The appliance is approved for bedroom or

bedsitting room installations.

The appliance must be installed in accor- dance with local codes if any. If none exist use the current installation code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in Canada.

The appliance must be properly connected to a venting system.

 

Optional

 

 

 

Remote

 

 

 

Receiver

 

 

 

Blower Knob

FP2621

 

ON/OFF Switch

 

WARNING

This appliance may be installed in an

Piezo Igniter

On/Off

 

 

 

Knob

 

aftermarket*, permanently located,

 

Remote

 

manufactured home, where not prohibited

HI/LO Knob

Gas Shut-Off Switch

 

Valve

 

by local codes

 

OFF/Pilot/ON

 

 

Figure 1 -

 

*Aftermarket: Completion of sale, not for purpose of resale,

IDV Series Fireplace Insert

from the manufacturer.

 

 

Gas Specifications & ORIFICE SIZE

HIGH ELEVATIONS

Input ratings are shown in BTU per hour and are certified without deration for elevations up to 4,500 feet (1,370 m) above sea level.

For elevations above 4,500 feet (1,370 m) in USA, installations must be in accordance with the current ANSI Z223.1/NFPA 54 and/or local codes having juris- diction.

In Canada, please consult provincial and/or local authori- ties having jurisdiction for installations at elevations above 4,500 feet (1,370 m).

 

 

Max.Input

Min. Input

Orifice

Model

Fuel

BTU/h

BTU/h

Size

IDV380NVC

Nat.

30,500

20,500

#35

IDV380PVC

LP

28,000

22,000

#53

IDV490NVC

Nat.

40,000

26,500

#30

IDV490PVC

LP

37,500

29,000

#50

The IDV Series gas inserts are equipped with a variable speed output gas control.

NOTE: IDV Series gas inserts operate without any elec- trical supply. Blower must be attached to 110/120V AC.

GAS pressures

 

Natural

Propane (LP)

Inlet Minimum

4.5” w.c.

11.0” w.c.

Inlet Maximum

10.5” w.c.

13.0” w.c.

Manifold Pressure

3.5” w.c.

10.0” w.c.

57D0016

Page 5
Image 5
Monessen Hearth IDV490PVC manual product features, product SPECIFICATIONS, High Elevations, GAS pressures, by local codes