Section 4
Troubleshooting
This section provides information to assist you in quickly detecting, isolating, and resolving error conditions that might occur when using the DCT1800. If you need assistance, call the Motorola Technical Resource Center (TRC):
!Inside the U.S.: 1-888-944-HELP (1-888-944-4357)
!Outside the U.S.:
Table
Table
Troubleshooting guidelines
Problem
No power to the DCT1800
Possible Solution
Check the power outlet for AC power.
Be sure the TV is tuned to the output channel of the DCT1800 (channel 3 or 4).
Verify that cable connections are correct from the TV set or monitor to the DCT1800.
Check that the power cord is properly plugged into the outlet and DCT1800.
Remote control is not responding
Check for an obstruction between the remote control and the DCT1800. Aim the remote control directly at the DCT1800, not the TV or VCR.
Be sure you firmly and deliberately press and release operation keys one at a time. Check that the DCT1800 has been initialized correctly; refer to Diagnostics.
The DCT1800 is not receiving a cable signal
Guide has no data
Check the cable connections and
Verify that the cable connections are correct.
Verify the TV is working and has a clear picture.
Unplug the power to the DCT1800 and plug in the unit again. Wait for the DCT1800 to collect the data.
DCT1800 Installation Manual
