3
Choosing the Menu Language
To make sure that the menus are displayed in the appropriate language for you, complete the following steps:
•While your receiver is turned on, aim the remote control at the receiver and press the OPTIONS key. The Options menu will appear.
•From the Options menu, select option 6 (Change System Settings), and the System Settings menu will appear.
•Select option 1 (Change Viewing and Language Settings), and the Viewing & Language Settings menu will appear.
•Option 3 shows you the language options available for the menus.
Press the | keys on |
the remote to select your | |
language. |
|
• Once you56have chosen a language, press the GO BACK key until you return to the Options menu or press the EXIT key to exit and return to watching programs.
Acquiring a Signal
Complete the following steps to help you acquire a signal:
• Using the number keys on the remote control, tune to the authorization channel (refer to the information supplied with your system). You should see a banner with the channel number at the top of the screen.
• Press the OPTIONS key on the remote control. The Options menu will appear.
• From the Options menu, select option 6 (Change System Settings), and the System Settings menu will appear.
• Select option 3 (Change Installation Settings), and on the Installation Settings menu select option 1 (Tune in Satellite Signal).
• Look at the value in the box labelled Signal. If it is less than 10, make sure that all connections between the satellite dish LNBF and the satellite receiver are correct. If the signal strength remains below 10, adjust the position of the dish in very tiny increments until you receive a satellite signal above 10.
22
