Motorola DSR405 manual Authorizing Your Receiver

Installation

increments. When the signal strength begins to decrease, mark the location on the mounting pole.

•The optimum compass direction setting is midway between the two points.

•Tighten the bolt(s) on the mounting pole so that it cannot move east or west.

Authorizing Your Receiver

•Press the EXIT key on the remote control. Then press the number keys for the authorization channel.

•Press the OPTIONS key on the remote control. The Options menu will appear.

•From the Options menu, select option 6 (Change System Settings), and the System Settings menu will appear.

•Select option 4 (Check System Status), and the System Status menu will appear. Line A shows your Unit ID number.

•Telephone the company that provides your

programming subscription, and ask to authorize your unit.

•When your receiver has received the authorization message the Trip Counter on the Installation Settings menu will advance.

Completing the Receiver Connections to

Your Entertainment System

You will need to make changes to connect your VCR.

•Connect the top/left TV terminal on the back panel of the receiver to the IN terminal on the VCR. If you had already connected this cable to your TV you must disconnect and connect it to your VCR.

•Connect the OUT terminal(s) on the VCR to the VHF IN terminal(s) on the TV.

DSR405 User Guide 25