3
Audio Settings
If you are in SAT mode (digital) broadcast, two options appear on the Audio Settings menu.
Audio Connections. Select option 1 (Audio Connections), and you will be able to select either TV or HiFi (the default is TV). Select TV if the receiver’s AUDIO OUT port is connected to your TV. Select
HiFi if it is connected to your stereo system.
Satellite Audio. Select option 2 and then select Mono, Stereo, Surround or Dolby Digital (the default is Surround). The Dolby Digital selection will disable other audio ports.
Installation Settings
Tune in Satellite Signal. This option allows you to see the strength of the signal your antenna is receiving.
Set VCR Code. This option allows you to store your VCR code in your receiver. When you use timers and want to record your favorite program, your receiver will control your VCR.
Set Remote Control Address.
This option allows you to control up to four receivers in a centralized area, with one or more remote controls. Each receiver requires a separate address. The default address is 000.
On the front panel of your receiver press the Menu button to bring up the Menu screen.
•Choose Options.
28
