Using Your Remote

If Your Three-Digit Code is not in the Tables (Scanning)

If you try to program your remote control using the three-digit codes, and the remote control does not work correctly, you may be able to find a code that works by using the "scanning" process.

1.Turn on the TV or the VCR-depending upon whether you wish to program the remote control for your TV or for your VCR.

2.Press the TV key (or VCR key) for at least three seconds or until the LED blinks.

3.The following steps explain how to "scan" through the TV (or VCR)

codes stored in your remote control using the

keys. (The LED will

not be lit while the

keys are depressed.

 

 

- While pointing the remote control at your TV (or VCR), press the

key to scan upward to the next code. (Use the

key to return to the5

previous code.)

 

 

 

- If the transmitted code is the correct one, your TV (or VCR) will turn

off, responding as if its POWER key were pressed.

 

- If your TV (or VCR) does not respond, depress the

key to try the

next code. Whenvyour TV (or VCR) turns onv6or off5as a result of the transmitted code, you will know that you have found the correct code.

- When you have found the correct code (power to your TV or VCR is toggled on or off), press the ENTER key. This will store the manufacturer’s code. The LED will then flash rapidly several times and turn off.

NOTE: If your TV is not listed in the tables and/or the codes for your brand are not accepted by the remote, you will need to use the remote originally manufactured for your unit.

Programming the Master Power Feature

If you wish to control the power on/off function of your satellite receiver, VCR, TV, and all connected equipment with a single press of the POWER key on your remote control, you can enable (or disable) the remote control’s Master Power feature by following these steps:

• Press the SAT key on the remote control for at least three seconds or until the light on the key blinks.

• Press the POWER key on the remote. The light will remain on steady. Press the power key a second time, and the light on the remote will blink on and off briefly, which indicates that the remote has accepted the Master Power command.

DSR405 User Guide

5

Page 19
Image 19
Motorola DSR405 manual If Your Three-Digit Code is not in the Tables Scanning, Programming the Master Power Feature