Installation
•Choose option 6 (Change System Settings).
•Choose option 3 (Installation Settings).
•On the Installation Settings menu, choose option 2 (Set Remote Control Address). Now follow the instructions on the Remote Control Address screen.
•If you have four receivers, you will have to change the addresses on three of them: they will have address of 000, 001, 002, and 003.
To program your remote control for each receiver, hold down the SAT key on the remote control until the light flashes. Once the light begins to flash enter the desired address.
System Status
This is a
Trip Counter. Trip Counter displays the number of message updates from your service provider.
Modem Status. Displays a number of messages that describe the current modem status.
Caller ID
When your telephone rings the Caller ID feature allows you to see who may be calling. This feature is only available if Caller ID functionality is enabled by your telephone company. See the "Options" section for more detailed information.
DSR405 User Guide | 29 |
