Radio Programming: Adding Contacts (DTR510 / DTR610 only) | |
|
|
Selecting Group Only
Selecting Group Only on a radio prohibits the user from initiating PrivateCalls.
1.Scroll to select Group Only and press 
under Change. The Group Only screen appears.
Group Only
NoneYes
9No
Select Back
NOTE: A 
next to an selection indicates the present selection.
2. Scroll to select the desired entry and press 
under Select. The display returns to the previous screen with the new GroupOnlyentered.
Entering a Ringer Type (Private Calls Only - not supported on DTR410)
A unique alert tone can be identified for each radio in your contact list. There are 12 ringer tones that can be selected. When a ringer tone is highlighted, the audio ringer tone sounds to help in making a selection.
1. Scroll to select Ringer and press 
under Change. The Ringer screen appears.
9
NOTE: A 
next to a selection indicates the present selection.
2.Scroll to select the desired ring. Highlighting a tone lets you hear it.
3.Press 
under Select to select the new ring. The display returns to the previous screen with the new Ringer entered.
4.Press 
under Save to store the new contact after all entries for the new contact have been completed. A confirmation screen appears confirming the saved contact.
5.Press 
to exit Programming mode and return to the Main Menu. Press 
under Reset.
April 27, 2005 |
