Motorola DTR510, DTR410, DTR610 manual Receiving and Making Calls, Types of Calls, Making a Call

Talkgrp in Use

Security

(Joe Smith)

Receiving a Call

General Radio Operations: Receiving and Making Calls 2-3

Receiving and Making Calls

NOTE: Your DTR Series radio must be programmed to be fully compatible with other DTR Series radios and fully utilize all radio features. Refer to Chapter 3 - Advanced Radio Operations.

Types of Calls

DTR510 and DTR610 radios can make and receive different types of voice calls:

• PublicGroup – One-to-many communication to all radios set to your channel and PublicGroup number. All DTR Series radios are factory programmed with 2 to 5 PublicGroups.

• Private – One-to-one communication with another￿￿￿￿￿￿￿radio, requires￿￿￿￿￿adding￿￿￿a user to the Contacts List.

DTR410 radios can make and receive PublicGroup calls only.

When a call is received, the radio chirps and the display shows the call type and transmitting caller’s user ID or name.

Making a Call

1.Choose a contact from your Scroll List, Contacts, or Recent Call List.

2.Press and hold the PTT button. Begin speaking after the radio emits the talk permit tone. To maximize clarity, hold the radio two-to-three inches away from your mouth.

3.Release the PTT button to listen.

NOTE: If “User Not Available” displays, the recipient is either: In a Call, Out of Range, or Turned Off.

Press to cancel and then try the call again. When contacting a group, at least one member must be available for the call to be successful.

6881097C81-O April 27, 2005