Motorola DTR510, DTR410, DTR610 ScanOn Call Forward, Remote Disable, Remote Monitor, Select, Back

Advanced Radio Operations: Accessing the Advanced Menu 3-3

Remote Disabling (initiated from DTR610 Models Only)

NOTE: Manager Mode must be enabled in order for a user to use this feature. Refer to page 4-8.

Remote Disabling allows a user to remotely enable or disable another DTR Series radio (except DTR410) on their channel. The selected radio must be turned on and within range in order to be enabled or disabled.

Scan:On

Call Forward

Remote Disable

Remote Monitor

Select	Back
1. From the Advance menu, scroll to highlight Remote Disable and press		under Select.
The Remote Disable screen￿￿￿￿￿￿appears. ￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2. Scroll to highlight a radio name from the list. Press under either Enable or Disable. The screen changes to confirm￿￿￿￿￿the selection.￿￿￿

NOTE: To cancel out of Remote ￿￿Disable, press and￿￿￿press under Select.

3. To enable or disable the selected radio, press under either Yes or No.

Once the radio is disabled, the display shows “Radio Disabled” and the radio cannot transmit, receive, or access it’s contacts.

6881097C81-O April 27, 2005