3-4

Advanced Radio Operations: Accessing the Advanced Menu

Remote Monitoring (initiated by DTR610￿￿￿￿￿￿Models￿￿￿￿￿￿￿Only)

NOTE: Manager Mode must be enabled in order to use this feature. Refer to page 4-8.

Remote Monitoring allows you to monitor a selected radio either for training purposes or if the target radio user is unable to press the PTT button. DTR410 radios do not support this feature.

1. From the Advance menu,￿￿￿￿￿￿scroll to highlight Remote￿￿￿￿Monitor and press under Select. The Remote Monitor screen appears.

2.Scroll to highlight a radio from the list to monitor and press under Select. The screen changes to show the radio’s status.

Remote Time (initiated by DTR610 Models Only)

Remote Time synchronizes the date and time to all other radios on your channel. Any receiving radio must have the transmitting radio User ID in their contact list to accept the time/date update. DTR410 radios do not support this feature.

NOTE: Radios must be turned on and within range to receive this broadcast message. The

transmitting radio does not receive a confirmation for any failures.

 

1. From the Advance menu, scroll to highlight Remote Time and press

under Select. The

screen displays a confirmation￿￿￿￿￿￿￿￿￿to ￿￿￿￿start remote￿￿￿￿￿￿time.￿￿

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Press under Yes.

April 27, 2005

6881097C81-O

Page 42
Image 42
Motorola DTR410, DTR510 manual Remote Time initiated by DTR610 Models Only