General Radio Operations: Call Alerts (DTR510 / DTR610 only) | |
|
|
Call Alerts (DTR510 / DTR610 only)
Sending a call alert lets the recipient know you want to talk to him or her. When you send a call alert, the recipient's radio emits a series of beeps, or vibrates, and displays your Unit Name or ID along with the time and date.
The recipient can:
•Answer – begin a call by pressing the PTT button.
•Clear – delete the call alert.
Sending Call Alerts
NOTE: Only Private Contacts can be alerted.
1. Highlight the Private Name/ID in Contacts or Recent Calls..
Contacts
Shipping
Maintenance
Smith
Alert
Back
2. | Press | under Alert. “Ready to Alert” appears on the display. |
3. | Press the PTT button until “Alert Successful” appears on the display. | |
NOTE: If the alert is not successful, the radio you are trying to reach is either in a call, on another | ||
| channel, has the radio turned off, or is out of range. | |
Receiving a Call Alert |
|
When you receive a call alert, you must answeror clear it. You cannot make new calls until you do. | |
| |
To answer a call alert, press the PTT button to respond to the sender. To clear a call alert, press 
under Clear.
April 27, 2005 |
