Cloning Mode: Cloning by Sending a Contact (not supported by DTR410) | |
|
|
8.Scroll to the contact to receive the new contact.
9.Press under Select to select the contact.
Send Contact
Add:Security
To:Joe Smith
Change Prgm
10.Press under Prgm. The screen is displayed showing the Add: and To: selections. If
these are correct press under Go to transmit the selection over the air. If the selections
are not correct press under Back to return to the selection menu.
Press Go To
Add:Security
To:Joe Smith
Over The Air
Go Back
If cloning was successful, both the source and targets radios indicated “Programming Successful”. If
April 27, 2005 |