Motorola i615 manual Activating Service, Powering On and Off, When You Power On For the First Time

Getting Started

Activating Service

The first time you power your phone on, you must be in your local calling area. This activates your service.

A screen then appears prompting you to select Ok to update your browser information. This screen will only appear during initial activation. See “Enabling Over-the-Air Security” on page 7.

Powering On and Off

The first time you power your phone on, a screen may appear asking you to update your browser information. This means you must enable security.

To power your phone on, press p.

Note: When powering on, if you press p for more than 5 seconds, you will turn on Airplane mode. See “Airplane Mode— Temporarily Turning Off Calls” on page 141.

To power your phone off, press and hold p.

When You Power On For the First Time

If the Enter SIM PIN Code screen appears, enter your SIM PIN. See “Entering the PIN” on page 12. Press A under Ok. If prompted, press A under Ok again.

When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 13).

As your phone connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the phone is ready to use.

6