Getting Started | Motorola MD780 Series instruction

Getting Started

Before you can use your telephone to make or answer calls, you must charge the battery. This section provides the step-by-step instructions you will need.

Battery Safety Instructions

• Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury.

UNCONTROLLED
•	Caution: There is a risk of explosion if you replace
	the battery with an incorrect battery type. Use only the
	battery that came with your phone or an authorized
	replacement recommended by the manufacturer.
•	Keep batteries out of the reach of children.
•	ContactDOCUMENTyour local
•	Remove batteries if storing over 30 days.
• Do not dispose of batteries in fire, which could result
	in explosion.
•	The rechargeable batteries that power this product
	must be disposed of properly and may need to be
	recycled. Refer to your battery’s label for battery type.
	recycling center for proper disposal methods.
	Getting Started

1

Image 16

Motorola MD780 Series manual Getting Started, Battery Safety Instructions

Contents

Uncontrolleddocument Handset Overview WelcomeCongratulations on your purchase of a Motorola product Base Station Controls Copyright 2005 Motorola, Inc Iii Respective owners. Uncontrolleddocument Table of Contents Contents Vii Important Safety Instructions Viii Do not place this product on an unstable cart, stand With your dealer or local power companyDamage to the product Nearby persons On the bottom of this equipment is a label that contains FCC InformationAmong other information, a product identifier in the form Xii This device complies with Part 15 of the FCC Rules OperationThis equipment has been tested and found to comply Xiii Xiv Battery Safety Instructions Getting Started Charging the Battery Rest the handset in the base so the charging Uncontrolleddocument Installing Backup Batteries Insert four AA alkaline batteries as directed onCompartment To replace the compartment cover, insert the tabs Uncontrolleddocument Using the Phone Main display UNCONTROLLEDUsing the Soft Keys Using the Navigation Key Installation Installing the Phone on a Desk Installing the Phone on the Wall Uncontrolled Setting the Ring Volume Setting UpPersonalizing Your Phone Setting the Ring Tone Setting Key Beeps On or Off When your choice displays, press SE ECTOn when the ringer is on, and off when the ringer Scroll through the options ON, FF, or Inked to Ringer Setting the Charging LED Charging LED Scroll to Name handset using your handset Scroll to Naming Your Handset and Base UnitName base on base unit Enter the name you want to use up to Uncontrolled First letter of the entry is an uppercase letter. o Storing Area Codes for Caller ID Setting the Date and Time Setting Touch Tone or Pulse Dialing Setting the LanguageYour handset uses touch tone dialing by default. Do Using the Phone Making a CallEnding a Call Answering a Call Using Automated Dialing Adjusting the Volume During a CallInserting Pauses in a Number Complete your transaction Using the Speakerphone To adjust the speakerphone volume, pressVolume up or volume down key. The volume controls Base unit Muting a Call Redialing a Number Putting a Call on HoldFinding a Lost or Misplaced Handset Using the Phonebook Storing a New Number Scroll down Scroll down until the phone number displays Storing a Recently Called NumberTo set the tones of incoming calls for this number Storing a Caller ID Number YouDOCUMENTwant to editSelect D NE Editing a Phonebook Entry Deleting a Phonebook Entry Sorting the Phonebook Copying a Phonebook Entry Calling a Number from the Phonebook Using Caller ID Handset can store up to 40 caller ID recordsTo call the number, press To reformat the number before you call, select Format Scroll to Delete to delete the current caller ID From the caller ID list, select OptionsEntry or Delete ALL to delete all caller ID records Set up handsets to automatically answer Multihandset FunctionsConference call Talk handset to handset on the intercom Using the Intercom Displayed Scroll to and select the handsetFyou wantTo end an intercom session, press Enabling Auto-Answer Select Hold Transferring Calls to Other HandsetsScroll to and select the handset to which you Conference Calling To join a conference call, press Base StationPress Handset Monitoring a Room TheUsingPhone Using the Answering Machine Setting Up the Answering Machine Setting Up Your Outgoing MessageTurning the Answering Machine On or Off Recording an utgoing Message Erasing an Outgoing Message Setting the Security ID Number Access your messages from any touch-tone phoneCharge because no new messages are waiting Security ID number allows you to remotely Setting Recording Quality Setting Voice PromptsRecording a Memo Checking Messages from the Base Station Using the Answering Machine ControlsChecking Messages from a Handset Checking Messages Remotely Message Forwarding Phone number you specified. When you answerWith Message Forwarding activated, the next time a Screening Calls Uncontrolleddocument Machine Answering Registering a New Expansion Handset New Expansion HandsetsDeregistering an Expansion Handset Press OK to register another handset, or press Exit Motorola Limited Warranty What Does this Warranty Cover? Exclusions Who is Covered What Other Limitations Are There? Mgbi