Storing Area Codes for Caller ID | Motorola MD780 Series guide

Storing Area Codes for Caller ID

You can store up to 5 area codes to make it easy to dial numbers from your list of caller ID calls. For example, if you store 954 in 10-digit format, when you receive a call from that area code, the phone number is stored in your call list with all 10 digits. The number will then be in the correct format for you to dial directly from the call list without any reformatting.

Each area code can be:		Setting
•	7-digit format	Setting
	You do not have to dial the area code to call numbers	Up
	in this area code.
•	10-digit format
	You have to dial the 3-digit area code + 7-digit phone
	number to call numbers in this area code.
•	11-digit format
UNCONTROLLED

Important: This feature should not be used in regions where the same area code can be used to dial 10-digit local numbers or 11-digit long distance numbers.

Disregard this setup if your phone will be used in such regions.

You have to dial the 1 + 3-digit area code + 7-digit phoneDOCUMENTnumber to call numbers in this area code.

Note: This section applies only if you subscribe to caller ID service from your local phone company.

1Select MENU.

2Scroll to LOC AREA CODE and select SELECT.

3Enter the first area code.

19

Image 34

Motorola MD780 Series manual Storing Area Codes for Caller ID

Contents

Uncontrolleddocument Handset Overview WelcomeCongratulations on your purchase of a Motorola product Base Station Controls Copyright 2005 Motorola, Inc Iii Respective owners. Uncontrolleddocument Table of Contents Contents Vii Important Safety Instructions Viii Do not place this product on an unstable cart, stand With your dealer or local power companyDamage to the product Nearby persons On the bottom of this equipment is a label that contains FCC InformationAmong other information, a product identifier in the form Xii This equipment has been tested and found to comply This device complies with Part 15 of the FCC RulesOperation Xiii Xiv Battery Safety Instructions Getting Started Charging the Battery Rest the handset in the base so the charging Uncontrolleddocument Compartment Installing Backup BatteriesInsert four AA alkaline batteries as directed on To replace the compartment cover, insert the tabs Uncontrolleddocument Using the Phone Main display UNCONTROLLEDUsing the Soft Keys Using the Navigation Key Installation Installing the Phone on a Desk Installing the Phone on the Wall Uncontrolled Setting the Ring Volume Setting UpPersonalizing Your Phone Setting the Ring Tone On when the ringer is on, and off when the ringer Setting Key Beeps On or OffWhen your choice displays, press SE ECT Scroll through the options ON, FF, or Inked to Ringer Setting the Charging LED Charging LED Name base on base unit Scroll to Name handset using your handset Scroll toNaming Your Handset and Base Unit Enter the name you want to use up to Uncontrolled First letter of the entry is an uppercase letter. o Storing Area Codes for Caller ID Setting the Date and Time Setting Touch Tone or Pulse Dialing Setting the LanguageYour handset uses touch tone dialing by default. Do Ending a Call Using the PhoneMaking a Call Answering a Call Using Automated Dialing Adjusting the Volume During a CallInserting Pauses in a Number Complete your transaction Volume up or volume down key. The volume controls Base unit Using the SpeakerphoneTo adjust the speakerphone volume, press Muting a Call Redialing a Number Putting a Call on HoldFinding a Lost or Misplaced Handset Using the Phonebook Storing a New Number Scroll down Scroll down until the phone number displays Storing a Recently Called NumberTo set the tones of incoming calls for this number Select D NE Storing a Caller ID NumberYouDOCUMENTwant to edit Editing a Phonebook Entry Deleting a Phonebook Entry Sorting the Phonebook Copying a Phonebook Entry Calling a Number from the Phonebook To call the number, press Using Caller IDHandset can store up to 40 caller ID records To reformat the number before you call, select Format Scroll to Delete to delete the current caller ID From the caller ID list, select OptionsEntry or Delete ALL to delete all caller ID records Conference call Set up handsets to automatically answerMultihandset Functions Talk handset to handset on the intercom To end an intercom session, press Using the IntercomDisplayed Scroll to and select the handsetFyou want Enabling Auto-Answer Select Hold Transferring Calls to Other HandsetsScroll to and select the handset to which you Press Handset Conference CallingTo join a conference call, press Base Station Monitoring a Room TheUsingPhone Using the Answering Machine Turning the Answering Machine On or Off Setting Up the Answering MachineSetting Up Your Outgoing Message Recording an utgoing Message Erasing an Outgoing Message Charge because no new messages are waiting Setting the Security ID NumberAccess your messages from any touch-tone phone Security ID number allows you to remotely Setting Recording Quality Setting Voice PromptsRecording a Memo Checking Messages from the Base Station Using the Answering Machine ControlsChecking Messages from a Handset Checking Messages Remotely Message Forwarding Phone number you specified. When you answerWith Message Forwarding activated, the next time a Screening Calls Uncontrolleddocument Machine Answering Registering a New Expansion Handset New Expansion HandsetsDeregistering an Expansion Handset Press OK to register another handset, or press Exit Motorola Limited Warranty What Does this Warranty Cover? Exclusions Who is Covered What Other Limitations Are There? Mgbi