Parameter Menus 10 - 61

Set Lengths for Discrete 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and
includes check digits . Set lengths for D 2 of 5 to any length, one or two discrete lengths, or length s with in a
specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page 10-93. For example, select D 2 of 5 One Discrete Length, then scan 1, 4, to
decode only D 2 of 5 symbols containing 14 characters. To change the sele ction or cancel an incorrect entry, scan
the Cancel bar code on page 10-95.
*D 2 of 5 - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page 10-93. For example, select D 2 of 5 Two Discrete Lengths, then scan 0,
2, 1, 4, to decode only D 2 of 5 symbols containing 2 or 14 characters. To change the selection or cancel an
incorrect entry, scan the Cancel bar code on page 10-95.
D 2 of 5 - Two Discrete Lengths
Length Within Range - Select this option to decode codes within a specified range. Select lengths using the
Numeric Bar Codes on page 10-93. For example, to decode D 2 of 5 symbols containing between 4 and 12
characters, first scan D 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (enter a leading zero for single digit
numbers). To change the selection or cancel an incorrect entry, scan t he Cancel bar code on page 10-95.
D 2 of 5 - Length Within Range
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters.
D 2 of 5 - Any Length
NOTE Selecting this option can lead to misdecodes for D 2 of 5 codes.