Parameter Menus 10 - 63

Set Lengths for Codabar
The length of a code refers to the number of characters (i.e., human readable characters) the code contains,
including start or stop characters. Set lengths for Codabar to any length, one or two discrete lengths, or lengths
within a specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page 10-93. For example, select Codabar One Discrete Length, then scan 1, 4, to
decode only Codabar symbols containing 14 characters. To change the selection or cancel an incorrect entry, scan
the Cancel bar code on page 10-95.
Codabar - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page 10-93. For example, select Codabar Two Discrete Lengths, then scan 0,
2, 1, 4, to decode only Codabar symbols containing 2 or 14 char acters. To change the selection or cancel an
incorrect entry, scan the Cancel bar code on page 10-95.
Codabar - Two Discrete Lengths
Length Within Range - Select th i s o ption to d e code a co d e within a specified range. Select lengths using the
Numeric Bar Codes on page 10-93. For example, to decode Codabar symbols containing between 4 and 12
characters, first scan Codabar Length Within Range, then scan 0, 4, 1 and 2 (enter a leading zero for single digit
numbers). To change the selection or cancel an incorrect entry, scan t he Cancel bar code on page 10-95.
*Codabar - Length Within Range
Any Length - Scan this option to decode Codabar symbols containing any number of characters.
Codabar - Any Length