Motorola MVME166IG/D2, MVME166D2 manual Terminal Input/Output Control

Debugger General Information

Terminal Input/Output Control

When entering a command at the prompt, the following control codes may be entered for limited command line editing.

3

Note

The presence of the caret ( ^ ) before a character indicates that the Control (CTRL) key must be held down while striking the character key.

^X

^H

(cancel line)	The cursor is backspaced to the beginning of the line. If the
	terminal port is configured with the hardcopy or TTY option
	(refer to PF command), then a carriage return and line feed is
	issued along with another prompt.
(backspace)	The cursor is moved back one position. The character at the
	new cursor position is erased. If the hardcopy option is
	selected, a "/" character is typed along with the deleted
	character.

<DEL>	(delete or	Performs the same function as ^H.
	rubout)
^D	(redisplay)	The entire command line as entered so far is redisplayed on
		the following line.
^A	(repeat)	Repeats the previous line. This happens only at the command
		line. The last line entered is redisplayed but not executed.
		The cursor is positioned at the end of the line. You may enter
		the line as is or you can add more characters to it. You can
		edit the line by backspacing and typing over old characters.

3-14 MVME166 Single Board Computer Installation Guide