Motorola MVME166D2, MVME166IG/D2 manual Slave Starting Address #2

A

Configure and Environment Commands

Table A-1. ENV Command Parameters (Continued)

ENV Parameter and Options	Default	Meaning of Default
Slave Starting Address #2	FFE00000	Base address of the local
		resource that is accessible by the
		VMEbus. Default is the base
		address of static RAM,
		$FFE00000.
Slave Ending Address #2	FFE1FFFF	Ending address of the local
		resource that is accessible by the
		VMEbus. Default is the end of
		static RAM, $FFE1FFFF.
Slave Address Translation Address #2	00000000	Works the same as Slave
		Address Translation Address #1.
		Default is 0.
Slave Address Translation Select #2	00000000	Works the same as Slave
		Address Translation Select #1.
		Default is 0.
Slave Control #2	01EF	Defines the access restriction for
		the address space defined with
		this slave address decoder.
		Default is $01EF.
Master Enable #1 [Y/N]	Y	Yes, Setup and enable the Master
		Address Decoder #1.
Master Starting Address #1	02000000	Base address of the VMEbus
		resource that is accessible from
		the local bus. Default is the end
		of calculated local memory,
		unless memory is less than
		16MB, then this register will
		always be set to 01000000.
Master Ending Address #1	EFFFFFFF	Ending address of the VMEbus
		resource that is accessible from
		the local bus. Default is the end
		of calculated memory.
Master Control #1	0D	Defines the access characteristics
		for the address space defined
		with this master address
		decoder. Default is $0D.
Master Enable #2 [Y/N]	N	Do not setup and enable the
		Master Address Decoder #2.
Master Starting Address #2	00000000	Base address of the VMEbus
		resource that is accessible from
		the local bus. Default is
		$00000000.

A-8 MVME166 Single Board Computer Installation Guide