Motorola NNTN7794B Silence All, RingandVibrate, ToactivateSilenceAll, TodeactivateSilenceAll

/The phone vibrates then rings for all calls.

,The ring volume is set to zero for all calls.

RingandVibrate

Tosetyourphonetoringandvibratewhenyoureceive phone callsorCallAlerts:

1.Press / > Multimedia > Ring Tones.

2.Make sure Vibrate All is set to Off.

3.Scroll through the list and select a ring tone.

4.Press / > Assign w/Vibe.

5.Select Phone Line 1 and/or Phone Line 2 and press Done (left softkey).

This icon/ appears on the display.

Note: You can also set 3D sound effects settings in the Ring Tones menu (/ > Multimedia > Ring Tones > 3D Effect) or when assigning a ring tone.

Silence All

The Silence All option allows you to mute all sounds without turning your phone off.

ToactivateSilenceAll:

With the phone in standby mode press and hold the volume key down until the ringer level is set at 0. (The screen will display ,.)

TodeactivateSilenceAll:

Press the volume key up repeatedly to select a volume level.

Tosetyourphonetovibrateinsteadofmakingasoundfor somefeatures butnotothers:

1.Press / > Multimedia > Ring Tones.

2.Make sure Vibrate All is set to Off.

3.Select Vibrate from the list of ring tones.

4.Select the feature(s) to which to assign Vibrate and press Done (left softkey).

Note: To set ring options for Direct Connect calls, Group Connect calls, and Talkgroup calls, see “Vibrate Settings” on page 71.

72 6. Settings