English
14
pressed within 5 seconds, scanning resumes.
• To stop scanning, briefly press T.
If you press PTT while the radio is scanning, the radio transmits on the channel you were on before you started scanning.
Skipping and Scanning
Scan has two temporary features to make it easier to use:
1.Scan advance: If the radio stops scanning on a channel you do not want to listen to, press ]to resume
scanning for the next active channel.
2.Nuisance delete: Press and hold [to temporarily remove a channel from the scan list. The channel returns the next time you use the scan feature.
Editing the Scan List
For faster scanning and to avoid hearing unwanted transmissions, you can edit the scan list to skip channels.
•Press Suntil hdisplays and the channel number and Y or nflash.
•Press ]or [to select the channel you want to remove from the scan list.
•Press Tto display either Yto include the channel or nto exclude the channel.
•Press PTT to exit.
Voice Scrambling
This feature gives you additional privacy. Anyone who is listening on the same channel and code will hear distorted speech, unless they have a voice scrambling code that matches yours.
•Select the channel on which you wish to set up the voice scrambling code.
•Press Suntil eshows in the display.
•Use ]or [to select the required code. (code 0 disables the voice scrambling code).
•Press PTT to exit.
Microphone Gain
Adjusting your radio’s microphone sensitivity level helps to minimize the possibility of unintended noises triggering a transmission, or enhances the ability to pick up quiet voices.
•Press Suntil gand ?show in the display.
•Press ]or [to select the sensitivity level as follows: 1- If you speak loudly, or are in a noisy environment. 2- Suitable for most applications.
3- If you speak softly, or are in a quiet environment.
•Press PTT to set level.
Signal Strength and Channel Busy Indicator
If another radio is transmitting on your set channel and code wwill show in the display and the red LED will flash
