Motorola SB5100 Series, 505788-006-00 manual Setting Up a USB Driver in Windows Me

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Setting Up a USB Driver in Windows Me

Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the USB cable. A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed.

1Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the window at bottom left is displayed.

2Click Finish to complete the installation. Otherwise, be sure the SURFboard Cable Modem CD-ROM is correctly inserted in your CD-ROM drive.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 95, 98, or Windows Me” on page 23.

Although your SURFboard cable modem model number may be different than in the images in this guide, the procedure is the same.

X 20 SB5100 Series Cable Modem User Guide

Home Print Exit