Motorola SM56 manual +Etbm, +Fclass, +Flo

Table 4: AT+ (Plus) Commands

Command	Option	Description
	1	Computer transmits a Flag on an under-run within a
		frame, and notifies the modem of any under-run or
		over-run
	d options	Specifies half-duplex control. Not available.
	e options	Specifies the Cyclic Response Code (CRC) type
	0	Disabled. No CRC generation or checking.
	1	In Framed sub-mode, the computer generates 16-bit
		CRC in the Transmit direction and the modem gen-
		erates 16-bit CRC on the Receive direction.
	f options:	Specifies Non-Return to Zero (NRZI) options
	0	NRZI encoding and decoding are disabled.
+ETBM		Disconnect Buffer Delay Control
	+ETBM=p,q
	r
	p options:	Specifies the disconnect buffer delay with pending
		transmit data
	0	Discard buffered data and disconnect
	1	Attempt to transmit until all data is delivered, then
		disconnect. Ignore timer.
	2	Attempt to transmit until all data is delivered or
		timer expires.
	q options:	Specifies the disconnect buffer delay with pending
		receive data
	0	Discard buffered data and disconnect
	1	Attempt to transmit until all data is delivered, then
		disconnect. Ignore timer.
	2	Attempt to transmit until all data is delivered or
		timer expires.
	r options:	Disconnect buffer delay timer, in 1-second incre-
	1-255,	ments
	default=0
+FCLASS		Fax/Data Mode
	+FCLASS=	Data Mode
	0
	+FCLASS=	Fax Class 1
	1
	+FCLASS=	Voice Mode (Not available in Data/Fax and Data/
	8	Fax/TAM modems.)
+FLO		Fax Flow Control
	+FLO=0	None

17