Receiving Messages

If your phone is ON and you receive a Caller ID, Voice Mail, or alphanumeric message:

An alert sounds or vibrates:

Your phone will beep or vibrate three times. See Ringer or Vibrator Selection on page 75 to set your phone’s alert. See page 77 to learn about Message Reminder Tones.

An indicator appears on the display:

Appears on the lower line of the display when you receive a Caller ID or alphanumeric message. It will stay on the display until you have viewed the Caller ID or read the message.

Urgent Appears in the main display when you receive an urgent message and your phone is in idle mode. After a few

seconds, the screen will change to Press and begin flashing.

Msg Mem Low Appears when your phone’s message memory is almost full (at approximately 85% capacity).

Msg Mem Full Appears in the main display when the message memory is completely full and your phone is in idle mode.

Appears when you receive a Voice Mail message. It will stay on the display until you have listened to the message. Your Service Provider will then signal your phone to turn the indicator OFF.

Press ¿ to open the Messaging Menu:

The specific icon will be flashing.

Voice Mail

Indicator

Caller ID/

Message Indicator

Note: See page 29 for more about receiving Caller IDs.

Messaging

Tip:

Your Service Provider holds your messages and will forward them after you have made room. See page 55

to learn how to delete messages.

49

Page 49
Image 49
Motorola ST7762 specifications Receiving Messages, Seconds, the screen will change to Press and begin flashing