Getting Started
Charging the Battery
New batteries are shipped partially charged. Before you can use your Personal Communicator, you need to install and charge the battery, as indicated in the following instructions. Some batteries perform best after several full charge/discharge cycles.
To charge the battery:
•Insert the adapter plug into the battery charger port and plug the adapter into a wall outlet. Insert the adapter plug into the charger port so the top of the plug (labeled TOP) faces up toward the display screen.
•Charge the battery at room temperature and never leave it in really hot, cold, or wet places.
•Charge only Motorola batteries in your Personal Communicator.
The batter indicator is located in the upper right corner of the screen when the Personal Communicator is on. When the battery is fully charged, the indicator looks like >. As the battery strength decreases, the solid lines begin to disappear, for example, =.
Turning Your V101 Personal Communicator On and Off
To turn your Personal Communicator on or off, press and hold , until the device vibrates or makes a sound.
If the SIM card is not installed or is installed incorrectly, Check Card is displayed.
20Turn your Personal Communicator off and install the SIM card.
